How to Change Battery in Jeep Key Fob
I am a serial entrepreneur and a consumer advocate. When I’m not helping car buyers, I love working on ventures that have a positive impact.
I run a cause marketing agency and serve on the board of Vayu Global Health where we are disrupting the medical industry and preventing the needless deaths of mothers and babies during childbirth.
Replacing the battery in your Jeep key fob can be daunting, especially if you have never done it before.
Changing a Jeep key fob battery can be a manageable task. With the right tools and the technical know-how, you can quickly and easily replace the battery and get your Jeep back up and running in no time.
This article will cover how to change battery in Jeep key fob
Table of Contents
What You'll Need
When it comes to replacing a Jeep key fob battery, there are several things you'll need to ensure a successful replacement. Before beginning the process, make sure you have the following items:
- The correct battery for your Jeep key fob. The model number of the battery can usually be found on the back of the key fob or in the owner's manual.
- A flathead screwdriver or a small prying tool. This will open the key fob if it can't be opened using your hands.
- A pair of tweezers. These will be used to get rid of the old battery and install the new battery.
- A sealant, such as epoxy or silicone. This will seal the key fob back up once the battery is installed.
Once you have all the necessary items, you can begin replacing the battery in your Jeep key fob. Take your time and follow the steps carefully to ensure a successful replacement.
How to Change Battery in Jeep Key Fob
To successfully change your Jeep key fob battery, take the following steps:
1. Opening the Key Fob
Once you have all the necessary tools and supplies, it's time to open your Jeep key fob.
Depending on the model, you can open the fob using your hands, a small flathead screwdriver, or a prying tool.
If the fob is sealed, you'll need to remove the screws on the back to access the battery.
When opening the fob, be careful not to damage any internal components. If the fob is sealed, use a flathead screwdriver to remove the screws carefully.
Once the screws are removed, gently pry the fob using a small prying tool. Don't exert too much pressure on the fob, as this may damage the internal components.
Once the key fob is open, you can access the battery. Make sure to note how the battery is positioned in the fob. This will make it easier to install the new battery once the old one is removed.
With the key fob open, you can move on to the next step – removing the old battery.
2. Removing the Old Battery
Now that you have the key fob open, it's time to remove the old battery. This can be done using a pair of tweezers.
Gently take out the battery and set it aside. Make sure not to touch the battery's terminals, as this can cause a short circuit.
Once the old battery has been taken out, move on to the next step – installing the new battery.
Before doing this, ensure the battery is the right fit. The model number of the battery should be printed on the back of the key fob or in the owner's manual.
When installing the new battery, ensure the terminals are pointing in the right direction.
This will ensure the battery is connected properly and will work correctly. Once the battery is installed, move on to the next step – sealing the key fob backup.
When sealing the key fob back up, use a sealant such as epoxy or silicone. This will ensure the key fob is sealed properly and won't come open again.
If you removed any screws to access the battery, put them back in place. Once the key fob is sealed, you can move on to the final step – testing the key fob.
3. Testing the Key Fob
Now that you have the new battery installed and the key fob sealed back up, it's time to test it out.
To do this, you'll press the button on the Jeep key fob to see if it works. If the key fob works correctly, you can be sure the battery is installed correctly.
Sometimes, the key fob may need to be fixed even if the battery was installed correctly. If this happens, the key fob is probably faulty. In this case, you'll need to contact a professional to diagnose and repair the issue.
If the key fob works correctly, congratulations – you've successfully replaced your Jeep key fob battery.
Changing a Jeep key fob battery is easier than it may seem.
Troubleshooting Tips
When replacing a Jeep key fob battery, there are several things you can do to ensure a successful replacement. Here are a few troubleshooting tips to keep in mind:
- Ensure you have the correct type and size of battery for your Jeep key fob. The model number of the battery can usually be found on the back of the key fob or in the owner's manual.
- When opening the key fob, be careful not to damage any internal components. If the fob is sealed, use a flathead screwdriver to remove the screws carefully.
- When removing the old battery, ensure not to touch the terminals. This can cause a short circuit.
- When installing the new battery, ensure the terminals are pointing in the right direction. This will ensure the battery is connected properly and will work correctly.
- When sealing the key fob back up, use a sealant such as epoxy or silicone. This will ensure the key fob is sealed properly and won't come open again.
By following these troubleshooting tips, you can ensure a successful replacement of your Jeep key fob battery.
Jeep Fob Key Battery Replacement Cost
Replacing the battery in your Jeep key fob can be a costly endeavor. While the cost of the battery itself is relatively low, the labor cost can add up quickly.
Depending on the model of your Jeep and the type of key fob you have, the total cost of replacing the battery can range from $50 to $100.
The cost of the battery itself is usually around $5-$10. The majority of the total cost comes from the labor involved.
Depending on the model of your Jeep, the labor can range from $45-$90. This cost covers the time and expertise needed to open the key fob, dispose the old battery, install the new one, and seal the key fob back up.
In some cases, you can save money by replacing the battery yourself. However, this can be a daunting task, so ensure you have the right tools and know-how before attempting it.
If you are confident and can do it, you can purchase the correct battery and follow the steps outlined in this article to replace the battery yourself.
Replacing a Jeep key fob battery can be a costly endeavor. However, you can save money by replacing the battery with the right tools and know-how.
Be sure to take your time and follow the steps carefully to ensure a successful replacement.
How Long Does a Jeep Key Fob Battery Last?
A Jeep key fob battery that lasts long is important for convenience and security. The key fob is essential for locking and unlocking your Jeep, so it's important to know how long its battery will last.
The good news is that most Jeep key fob batteries will last for three to four years, depending on how often you use them.
The more you use it, the quicker the battery will wear down. If your key fob has been in use for three years without any problems, the battery is likely working just fine.
Fortunately, replacing the battery in a Jeep key fob is easy. You only need a small Phillips head screwdriver and a new CR2032 battery.
Once you've unscrewed the back of the key fob, you can pop the old battery out and insert the new one.
Make sure you insert the positive side facing up and then screw the back of the fob back on.
It’s important to remember that the battery in a Jeep key fob will eventually wear out and need to be replaced.
Doing so will ensure that your key fob is always working properly and that your Jeep is secure.
Additional Considerations
When replacing a Jeep key fob battery, there are a few additional considerations to keep in mind.
First, make sure to dispose of the old battery appropriately. Batteries contain hazardous materials, so they should not be disposed of in the regular trash.
Instead, take the old battery to a recycling center or contact your local waste management facility for more information.
It's also a good idea to keep a spare battery on hand. This way, if your battery ever runs out, you'll have a replacement handy. Additionally, it's a good idea to keep the owner's manual for your Jeep in a safe place. This way, you can refer to it if you ever need to replace the battery in your key fob.
By taking a few extra steps, you can ensure a successful replacement of your Jeep key fob battery.
Conclusion
In summary, changing the battery in your Jeep key fob is a simple and cost-effective process that can be completed in just a few minutes.
The key is to have the right tools, including the correct replacement battery and a small flathead screwdriver or prying tool, and to follow the step-by-step guide carefully.
Remember, maintaining your key fob's battery not only ensures your vehicle's convenience features work seamlessly but also contributes to your Jeep's security.
If you experience any challenges during the battery replacement process, don't hesitate to consult the owner's manual or seek professional assistance.
Regularly checking and replacing your key fob battery will keep you from getting caught off guard by a dead battery and ensure that your Jeep key fob remains functional and reliable.
